Single Hung Windows

Single Hung Windows in Fort Myers, FL | Winslow Windows & Doors

Single hung windows remain one of the most requested impact-rated replacement profiles we install across Fort Myers, FL. The design is refreshingly simple: a fixed upper sash and an operable lower sash, both glazed in laminated impact glass for storm protection without the need for additional shutters. For homeowners from McGregor Boulevard to Gateway, this window delivers the classic vertical look Florida architecture expects, while meeting the state’s strictest wind-borne debris requirements. Winslow Windows & Doors has installed single hung units across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, and our Fort Myers install crews set every frame level, plumb, and square. If you’re pricing a replacement project, call (239) 453-7751 for a free estimate.

Call (239) 453-7751

Product Overview - Single Hung Windows

The single hung window is a workhorse profile in Southwest Florida residential construction. You’ll see it in 1970s ranch homes off Summerlin Road, in newer Cape Coral-style stucco builds east of I-75, and in mid-century neighborhoods like Pine Manor. The fundamental design puts strength where Florida homes need it most: the upper sash stays fixed, which reduces the number of moving parts exposed to wind pressure, while the lower sash operates vertically for ventilation. This isn’t a glamorous architectural statement piece. It’s a quieter, more durable alternative to horizontal sliders and a better budget fit than casements for many whole-home replacements.

What makes this product appropriate for hurricane-prone construction starts with the glass package. Laminated impact glass uses a PVB interlayer that holds the pane together if a 2×4 or storm debris strikes it during a hurricane. The glass cracks, the inner layer stretches, and the window continues protecting your home from wind and water intrusion. That’s the core of the FBC High-Velocity Hurricane Zone standard that governs Fort Myers and all of Lee County. When paired with a properly anchored aluminum or vinyl frame, the single hung profile becomes a storm-rated building component, not just a window. We install these units with the same care we apply to all our impact products, because a NOA-rated window loses its rating if the installation doesn’t match the tested assembly.

Architecturally, single hung windows fit virtually any Florida elevation. Their narrow sightlines work on ranch homes, their vertical proportions suit two-story Colonials near the river, and their clean frame reveals don’t fight with Mediterranean or coastal cottage trim details. For Fort Myers homeowners replacing original wood or builder-grade aluminum windows, the impact single hung offers the closest visual match to what they already have, with a meaningful upgrade in storm protection.

Technical Specifications

Every product page should give you the numbers and options up front. Here’s what you can spec on a single hung impact unit from Winslow Windows & Doors in Fort Myers:

• Frame materials: Aluminum and vinyl. Aluminum suits high-exposure coastal elevations and taller openings. Vinyl works well inland and offers strong thermal performance at a lower material cost.
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, and clear glass. Each can be combined to meet your design pressure requirements and energy goals.
• Finish options: White, almond, bronze, black, and tan. All finishes are baked or painted for South Florida UV exposure.
• Screen options: Half screen, covering the lower operable sash only, or full screen, covering the entire opening when the lower sash is down.
• Design pressure: Matched to your specific wind zone, up to +/-100 PSF, never higher. We don’t over-spec a window beyond what your structure actually requires.
• Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers are issued per configuration and included with your specific quote. Engineered to Florida Building Code HVHZ requirements.

Exact frame dimensions depend on your rough opening and the manufacturer line you select. We measure every opening during your on-site estimate, so your quote reflects real numbers, not a catalog guess.

Hurricane & Compliance Performance

Laminated Impact Glass. Each lite carries a PVB (polyvinyl butyral) interlayer between two panes of glass. Under impact, the glass fractures but the interlayer holds the pane in the frame, keeping wind, rain, and debris outside your Fort Myers home. This is the same protection principle used in automotive windshields, scaled for structural hurricane loading.

Miami-Dade NOA / FL Product Approval. Our single hung configurations carry Miami-Dade Notice of Acceptance and Florida Product Approval numbers, issued per configuration. That means the exact frame, glass, hardware, and anchoring combination you buy has been tested and documented as a system. We verify the specific approval number for your quote.

FBC / High-Velocity Hurricane Zone Compliance. Fort Myers sits inside the HVHZ designation under the Florida Building Code. These windows are engineered to meet those requirements, which are among the strictest building standards for wind-borne debris in the United States.

TAS 201 / 202 / 203 Testing Context. HVHZ-rated products are evaluated under a family of protocols: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. Our single hung windows are tested within this protocol framework, so your permit review moves without friction.

Design Pressure Matched to Your Wind Zone. We specify design pressure based on your exact wind zone in Lee County. Ratings go up to +/-100 PSF, and never higher than your home actually needs. Overspecifying a window wastes money, and underspecifying fails inspection. We get it right the first time.

Energy Performance Options. Low-E insulated glass is available across our single hung lines, reflecting solar heat while admitting light. In a Fort Myers climate where the AC runs nine months a year, this is a practical upgrade worth evaluating alongside the storm-rated laminated lites.

Color & Glass Options

Color makes more difference in curb appeal than most homeowners expect, and Fort Myers’ coastal and Mediterranean architecture rewards thoughtful finish choices. White remains the most common choice in the market, particularly on ranch and cottage-style homes. It reads clean and bright against stucco and lap siding. Almond and tan warm up facades that lean Spanish or Florida vernacular, pairing well with terracotta roof tiles and natural stone accents. Bronze works beautifully on transitional homes and adds a defined frame around the glass, especially on homes with dark trim or bronze hardware. Black has become increasingly popular on modern and coastal contemporary builds from downtown Fort Myers to newer communities south of Estero, giving windows a crisp architectural presence against white or light gray walls.

Glass selection is about balancing light, heat, and code. Clear laminated impact glass offers the truest daylight and the lowest material price. Tinted glass cuts glare and solar gain, a real benefit on west-facing elevations that catch the afternoon sun across the Caloosahatchee. Low-E insulated glass is where storm protection and energy performance meet, with the Low-E coating reflecting heat while the insulated airspace reduces thermal transfer. Most of our Fort Myers clients pairing these windows with a home-wide replacement choose Low-E for the long-term comfort benefit.

Installation by Winslow Windows & Doors in Fort Myers

An impact window is only as strong as the installation behind it. A Miami-Dade NOA rating applies to the entire assembly: glass, frame, hardware, anchoring, and the perimeter seal. If any piece of that assembly is installed wrong, the rating is compromised, even if the window itself is perfect. That’s the core reason we exist. Our Fort Myers crews install single hung windows daily, and we follow an installation practice grounded in AAMA 2400/2410 standards and an AAMA 812 low-expansion foam perimeter sealant.

Every project starts with a pre-install inspection. We check rough opening dimensions against the window order, verify the existing framing for rot or water damage (common within a mile of saltwater in Fort Myers Beach and San Carlos Island), and confirm that the anchoring plan matches the approved product documentation. On install day, the old window comes out carefully, the opening is prepped, and the new unit is set level, plumb, and square before the first fastener goes in. Low-expansion foam seals the perimeter to stop air and water intrusion without bowing the frame. Then we flash the opening, reinstall trim, and run a final water test before cleanup. Permitting for any HVHZ jurisdiction, including unincorporated Lee County and the City of Fort Myers, requires the NOA or FL Product Approval documentation in your permit package. We know the local process and we help our clients move through it.

Coastal exposure matters here. Homes near the water in Fort Myers Beach, and along McGregor and the river, generally fall into higher wind zones that demand stronger design pressures and more careful anchoring. An installer that doesn’t understand those gradients can hand you a window that fails the first real storm. Our crews inspect and install with that exposure in mind from the first measurement to the final seal.

Frequently Asked Questions - Single Hung Windows

Get a Quote - Single Hung Windows in Fort Myers

The first step is a free on-site measurement. We’ll price your single hung window project across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, so you get an apples-to-apples quote with the configuration that fits your home. Call (239) 453-7751 to schedule your free estimate in Fort Myers, FL today.

Written by the team at Winslow Windows & Doors, serving Fort Myers and Lee County, Florida.