Casement Windows

Casement Windows in Fort Myers, FL | Winslow Windows & Doors

Casement windows are side-hinged, crank-operated windows that swing outward like a door. In Fort Myers, they’re a practical choice for homeowners who want impact protection without sacrificing ventilation or clear sightlines. The crank mechanism lets you open the window fully outward, catching coastal breezes that a sliding window simply can’t. Winslow Windows & Doors installs impact-rated casement windows across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass product lines, and we’ve been doing this work in Lee County long enough to know exactly what a Fort Myers home demands from its windows. Call (239) 453-7751 to discuss your project.

Call (239) 453-7751

Product Overview - Casement Windows

Casement windows operate on a hinge mounted at the side of the frame. You turn a crank, and the sash swings outward, which means the entire opening clears for airflow. That matters in Fort Myers, where afternoon sea breezes and evening cross-ventilation are part of life from October through May. The crank mechanism also creates a mechanical advantage: as you close the window, the sash presses into the frame, compressing the weatherstripping around all four sides. This full compression seal is why casements outperform sliding windows on air infiltration. The seal tightens as you close the crank, locking out drafts, humidity, and wind-driven rain.

For hurricane-prone construction, that compression matters even more. The closed casement becomes a rigid panel locked at multiple points around the frame. When laminated impact glass is added, the whole assembly works as a system: the glass resists impact, the frame resists wind pressure, and the multi-point locking hardware keeps the sash seated. Our Fort Myers clients choose casements for bedrooms, kitchens, living rooms, and anywhere they want an unobstructed opening with a clean, modern look. Since there’s no center rail or meeting stile like you find on a double-hung or sliding window, the view stays uninterrupted when the window is closed, and the opening is completely free when it’s open.

Casement Window Technical Specifications

Winslow Windows & Doors can configure casement windows to fit the specific requirements of your Fort Myers home. Below is a rundown of the primary materials, glass options, finish selections, and screen configurations available on our casement lines.

• Frame materials: Aluminum or vinyl. Aluminum gives you a thinner profile and a more architectural, contemporary look. Vinyl offers a warm feel, strong thermal performance, and low maintenance. Both are engineered for coastal exposure.
• Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, or clear glass. Glass packages can be combined, for example, laminated impact glass with a Low-E coating on an insulated unit.
• Finish options: White, almond, bronze, black, and tan. Finish availability depends on the frame material and manufacturer line; our team will confirm what’s available on your specific configuration.
• Screen options: Fixed screen or retractable screen. Retractable screens roll out of sight when the window is closed, preserving the clean look of the casement.
• Operation: Side-hinged, crank-operated. Hardware options vary by line and include folding or tee handles.
• Size range: Casements can be built in a wide range of widths and heights; maximum sizes are limited by the design pressure rating required for your wind zone. We verify every size against the approved configuration before quoting.

Hurricane & Compliance Performance

Every casement window we install in Fort Myers is configured to meet the structural and impact requirements of the Florida Building Code. Here’s what goes into that performance.

Laminated Impact Glass

The glass in an impact casement is a laminated unit with a PVB (polyvinyl butyral) interlayer sandwiched between two panes of glass. Under impact, the glass may crack, but the interlayer holds the shattered pieces in the frame. Debris doesn’t enter the home, and the window continues to protect the building envelope until the storm passes.

Miami-Dade NOA / Florida Product Approval

Our configured casement windows carry Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers issued per configuration. These approvals exist so a building department in Fort Myers or unincorporated Lee County can verify that the specific window you’re installing meets the code. We provide the approval documentation with every permit submittal. Verify the exact numbers on your quote, since they change based on window size, glass package, and frame material.

FBC / HVHZ Compliance

Fort Myers sits in the High-Velocity Hurricane Zone, a designation under the Florida Building Code that carries the strictest wind-load and impact requirements in the state. Our casement windows are engineered to FBC HVHZ requirements, not merely to the lower standards of non-HVHZ regions. That matters here more than almost anywhere else in Florida.

TAS 201 / 202 / 203 Testing Context

HVHZ-rated products are tested under a specific protocol family. TAS 201 is the large-missile impact test: a length of timber is fired at the glass to simulate wind-borne debris. TAS 202 is the cyclic wind-pressure loading test, which pushes and pulls the window repeatedly after impact to simulate the buffeting of a hurricane. TAS 203 evaluates forced-entry resistance. These three tests, together, are what separate a rated impact product from a standard window.

Design Pressure Matched to Your Wind Zone

Design pressure is the structural rating that tells you how much wind force the window can handle, expressed in pounds per square foot (PSF). We match the design pressure of your casement windows to the wind zone of your specific Fort Myers address, up to +/-100 PSF, never higher. If your home sits on an exposed canal, gulf-front lot, or a tall building with site-specific wind loads, the engineering report for your project will dictate the required rating.

Energy Performance

Impact protection doesn’t mean you give up efficiency. Low-E insulated glass packages are available on our casement lines. Low-E coatings reflect solar heat while allowing visible light through, and insulated glazing reduces heat transfer through the glass assembly. In a Fort Myers summer, that combination keeps your air conditioning from working harder than it needs to.

Color & Glass Options

Fort Myers architecture leans coastal and Mediterranean: stucco exteriors, tile roofs, and warm earthy tones. Our casement finishes are available in white, almond, bronze, black, and tan, depending on the line and material you choose. White and almond are the most common selections for traditional Fort Myers homes, blending with light stucco walls and white trim. Bronze and black have become popular on more modern builds, particularly for exterior accent windows or homes with dark metal roofing. Tan works well on older Florida ranch homes where the exterior palette runs warm and sandy.

Glass selection follows the same practical logic. Clear laminated impact glass gives you the most natural light and is the most common choice when hurricane protection is the priority. Tinted glass reduces glare and solar heat gain on west-facing windows that catch the harshest afternoon sun. Low-E insulated glass is the best all-around pick for energy performance, reflecting heat before it enters the home while maintaining clarity. Your Winslow Windows & Doors project consultant will walk you through the trade-offs on your specific elevations and window sizes.

Installation by Winslow Windows & Doors in Fort Myers

Even the best NOA-rated casement window underperforms if it’s installed wrong. A gap in the perimeter seal, a frame set out of square, or a misaligned sash will undermine the very ratings the product was engineered to achieve. That’s why Winslow Windows & Doors handles the full installation, start to finish, and why our installation practice follows AAMA 2400/2410 standards.

Every installation starts with a pre-install inspection. We measure the existing openings, check the condition of the surrounding framing, and identify any water intrusion or rot that needs to be addressed before the new window goes in. The new casement is then set level, plumb, and square. We shim where necessary and anchor the frame per the manufacturer’s approved installation method for HVHZ jurisdictions. The perimeter is sealed with AAMA 812 low-expansion foam, which expands to fill the gap between the rough opening and the window frame without distorting it. That foam creates a thermal and moisture barrier that conventional fiberglass insulation cannot match. At the exterior, the window is flashed and sealed to shed water away from the opening, and we run a final water test before replacing interior trim and cleaning up the site.

Fort Myers and Lee County building departments require permit documentation for replacement windows, including the Florida Product Approval or Miami-Dade NOA for the exact units going in. We handle that submittal as part of the project, so your permit application has the right paperwork from day one. Coastal exposure, wind zone, and elevation all factor into the engineering review, and we’ve done enough of these across Fort Myers to anticipate the questions the reviewers ask.

Frequently Asked Questions - Casement Windows

Get a Quote - Casement Windows in Fort Myers

If you’re considering impact casement windows for your Fort Myers home, start with a conversation. We’ll review your openings, your wind zone, and your finish and glass preferences, then put together a clear, line-item quote for the full project. Call (239) 453-7751 to schedule a free on-site measurement.

Written by the team at Winslow Windows & Doors, serving Fort Myers, FL and greater Lee County.