Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterBay & Bow Windows in Fort Myers, FL | Winslow Windows & Doors
Bay and bow windows project outward from your wall to add usable interior square footage, a deeper sill, and panoramic views that a flat window simply can’t deliver. In Fort Myers, this profile has to do more than look good. It carries laminated impact glass engineered for High-Velocity Hurricane Zone conditions, backed by Miami-Dade NOA documentation. Winslow Windows & Doors fabricates and installs these custom multi-panel configurations across Fort Myers, Cape Coral, Sanibel, and Bonita Springs, with every unit set level, plumb, and square per AAMA 2400/2410 practice. Call (239) 453-7751 to start your quote.
Product Overview - Bay & Bow Windows
Bay and bow windows are both made of multiple panels joined at angles, but they differ in geometry. A bay window typically runs three panels with a fixed center picture window flanked by angled operable or fixed units. A bow window uses four or more narrower panels arranged in a gentler arc. Both add a seating ledge, a shelf for plants, or a breakfast nook, and both create a wider field of view than a standard window opening. Here in Fort Myers, that daylit projection has to withstand real wind loads, not just look nice in a great room.
The Impact Series from Winslow Windows & Doors pairs that architecture with hurricane-rated engineering. Frames come in extruded aluminum or vinyl, both built for coastal humidity and salt air. Laminated impact glass carries a polyvinyl butyral (PVB) interlayer that holds the pane in the frame even under large-missile impact, which is the performance standard Fort Myers homeowners actually need. Design pressures for each configuration are matched to your specific wind zone, never overbuilt to a number you don’t need, and never below code. The result is added interior square footage and panoramic sightlines engineered to your wind zone, not someone else’s.
This window works beautifully for a living room reading nook, a dining bay, or a kitchen garden window replacement. If you’ve been pricing out a remodel or a retrofit in a 33901 bungalow, a McGregor Boulevard ranch, or a Gulf Harbour high-rise unit, our team will measure your opening and build to fit it exactly. Bay and bow windows are custom fabricated to the opening, which means no compromise on sightlines or structural load.
Technical Specifications
- Frame materials: Extruded aluminum or vinyl
- Maximum size: Custom fabricated to the opening
- Glass options: Laminated Impact Glass (PVB Interlayer), Low-E Insulated Glass, Tinted Glass, Clear Glass
- Finish options: White, Almond, Bronze, Black, Tan
- Sill options: Standard Sill, Seat/Shelf Sill
- Design pressure: Matched to your wind zone, up to +/-100 PSF, never higher
- Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration; engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements
Bay and bow configurations are not a single stock size. Every unit is fabricated to your rough opening, the panel count you want, the projection depth that fits your wall and eave line, and the wind zone mapped to your Fort Myers address. That custom engineering is exactly what a code-compliant HVHZ installation demands.
Hurricane & Compliance Performance
Laminated Impact Glass
The glass assembly uses a PVB (polyvinyl butyral) interlayer bonded between two panes. Under a debris impact, the glass may crack but it does not shatter inward. The interlayer holds the pane in the frame, keeping wind and water out until the glazing can be replaced.
Miami-Dade NOA / Florida Product Approval
Notice of Acceptance and Florida Product Approval numbers are issued per configuration, not as one blanket rating across all sizes. Winslow Windows & Doors provides the documentation specific to your exact bay or bow window on your quote, which is what your permitting office in Fort Myers will ask for.
FBC / HVHZ Compliance
Every Impact Series bay and bow window is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That is the stricter code path that applies to most of Lee County. A product built for inland wind loads is not the same as one engineered for HVHZ, and we only sell the latter in Fort Myers.
TAS 201 / TAS 202 / TAS 203 Testing Context
HVHZ-rated products are tested under a family of protocols: TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. These tests simulate what a storm actually does to a projecting window: hit it, then hammer it with fluctuating pressure, then see if it still stands up to intrusion.
Design Pressure for Your Wind Zone
Design pressure is the PSF rating the window is built to carry. Our configurations are matched to your wind zone and engineered up to +/-100 PSF, never more than the structure requires. Overbuilding a DP rating adds cost without adding protection. The right number is the one your engineer and your AHJ require.
Energy Performance
Low-E insulated glass options are available for anyone who wants solar control along with impact performance. Tinted glass and clear glass round out the lineup. For a west-facing bay window in Fort Myers, Low-E insulated glass is the combination we recommend most often.
Color & Glass Options
Finish selection for a bay or bow window in Fort Myers tends to follow the architecture of the home. White and Almond are the workhorse finishes for Florida coastal builds and condominium rehabs, where a clean, bright look matches stucco and light paint palettes. Bronze and Black finish frames read more contemporary, and they hold up beautifully on the Mediterranean-style homes you see in neighborhoods like Gulf Harbour, McGregor, and parts of Cape Coral. Tan bridges the gap: warmer than white, softer than bronze, and a good fit for homes with sand or beige exteriors.
Glass choice is about light and heat. Clear laminated impact glass delivers the true impact rating without altering your view. Tinted glass knocks down glare and heat gain slightly, which is useful on direct western exposures. Low-E insulated glass is the energy option; it combines the PVB impact laminate you need for HVHZ compliance with a thermal barrier that keeps the air-conditioned interior more comfortable. We’ll walk through the pairing on your estimate so you’re not guessing at the showroom.
Installation by Winslow Windows & Doors in Fort Myers
A bay or bow window is only as good as its installation. The NOA rating applies to the manufactured unit. If that unit is set out of level or shimmed incorrectly, the load path changes and the design pressure figure on the sticker means less. That is why our installation practice follows AAMA 2400/2410 and uses AAMA 812 low-expansion foam perimeter sealant around the entire opening. The goal is an airtight, watertight perimeter that stays that way for the life of the window.
Every Fort Myers bay or bow window installation starts with a pre-install inspection. We check the rough opening, the header, the existing flashing, and the condition of the wall cavity before anything is ordered. Once the unit is on site, we set it level, plumb, and square. The unit is anchored per the manufacturer’s installation instructions and the accepted plans, then sealed with AAMA 812-compliant low-expansion foam around the full perimeter. Crickets and head flashing are addressed because a projecting window catches rainwater differently than a flat window. The final steps are a water test around the sill and perimeter, interior and exterior cleanup, and a walkthrough with the homeowner.
Fort Myers adds specific considerations on top of the standard process. Coastal exposure means higher wind zones and stricter plan review in some parts of Lee County. Permitting in HVHZ jurisdictions will require your Miami-Dade NOA or Florida Product Approval submittal to match the exact configuration you install. Winslow Windows & Doors handles that documentation for you, and we are fully licensed and insured to pull permits and see the inspection through to close.
Frequently Asked Questions - Bay & Bow Windows
The design pressure is matched to your specific wind zone, engineered up to +/-100 PSF and never higher. The exact DP figure for your configuration is determined by your Fort Myers address, the panel size, and the projection depth, and it is listed on your quote and on the NOA documentation.
Bay and bow windows are custom fabricated to the opening, so lead time runs longer than an off-the-shelf stock window. The specific production schedule depends on the configuration, glass package, and finish you select. When we give you a quote, we’ll give you a firm production and installation schedule in writing.
Yes, in nearly every Fort Myers and Lee County HVHZ jurisdiction your permit package will require the Miami-Dade NOA and Florida Product Approval numbers for the exact configuration you are installing. Winslow Windows & Doors prepares and submits that documentation for you as part of the installation.
Yes. Bay and bow windows are fabricated to your opening, not cut down from a stock size. You choose the panel count, the projection depth, the operable versus fixed units, the glass package, and the finish. That flexibility is what makes a bay or bow such an effective use of an existing wall opening in a Fort Myers home.
Wash the frame with mild soap and water and wipe the glass with a standard glass cleaner that is safe for treated surfaces. Rinse built-up salt residue a few times a year if you’re close to the Gulf, since salt deposits can dull the finish over time. No special sealants or coatings are needed on the PVB impact laminate itself.
For any custom size, finish, or installation timeline question, call (239) 453-7751 and we’ll walk you through your options directly.
Get a Quote - Bay & Bow Windows in Fort Myers
If you’re ready to add that projected seating bay or panoramic bow to your Fort Myers home, start with a free on-site measurement. We’ll check the opening, talk through glass and finish options, and provide a written line-item quote with no surprises. Call (239) 453-7751 to schedule your estimate today.
Written by the team at Winslow Windows & Doors, serving Fort Myers and all of Lee County with hurricane-impact window and door installations.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Winslow Windows & Doors Services
What Neighbors Say About Winslow Windows & Doors
Detailed Images
