Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Shingle, Tile & Metal Roofing in Fort Myers: What to Know First
Mr-Glass shingle, tile, and metal roofing in Fort Myers runs into the same three problems we see on every roof in Lee County: sun-baked sealant, wind-lifted flashing, and fasteners that corrode faster than the manufacturer’s warranty projections assume. We provide independent Mr-Glass roofing repair and replacement as an unaffiliated service provider, which means we make decisions based on what’s actually happening on your roof, not what a brand rep wants us to say. Most inspections take about an hour, most repairs are done in a single visit, and every estimate is free with no trip charge if you’re in the home county. If you own a Mr-Glass roof and want to know whether it’s holding up the way it should, call (239) 453-7751 and a live person answers, day or night.
How Mr-Glass Products Fail, and How We Fix Them
Mr-Glass builds a solid product, but Fort Myers has a way of finding the weak link in any roof system. Here are the failure patterns we see most often on Mr-Glass installations across the area:
- Tile underlayment breakdown on older Mr-Glass tile roofs. The tile itself usually looks fine from the driveway, but the underlayment beneath it has a service life shorter than the tile by a decade or more in Fort Myers humidity. We see this on Mr-Glass barrel tile profiles installed before 2015. The fix is lifting the tile, replacing the felt or synthetic underlayment, and re-bedding the tile, which beats waiting for a ceiling stain to tell you the roof already failed.
- Shingle granule loss along the south-facing slopes. Mr-Glass asphalt shingle lines take a beating from the Fort Myers sun, and the south and southwest exposures lose granules first. What starts as grit in the gutter after a summer storm turns into exposed asphalt, then pin-holes, then leaks. We catch it early during inspections and replace affected shingles before the decking gets involved.
- Metal panel seam separation on Mr-Glass standing seam systems. The thermal expansion cycle in Fort Myers, daily heat and overnight humidity, works seams loose over time. We mostly see this on Mr-Glass metal roofs with mechanical seam profiles rather than snap-lock. The panels don’t need replacing; the seams need re-crimping and resealing with a polyurethane sealant rated for coastal salt exposure.
- Flashing failures at roof-to-wall transitions and chimney bases. This is the number one leak source on Mr-Glass roofs of all three material types. Fort Myers wind-driven rain pushes water sideways, and if the step flashing or counter-flashing was installed with the wrong gauge or the sealant has dried out, water finds the gap. Our fix is removing the old flashing, inspecting the substrate, and installing new flashing with proper overlap, not just slapping more caulk on it.
- Rust and corrosion at Mr-Glass metal roof fasteners. Original fasteners on some Mr-Glass metal installations were not upgraded to coastal-grade stainless, and in Fort Myers the salt air accelerates corrosion. We replace corroded fasteners with 316 stainless and inspect the panel gaskets at the same time, because a rusty fastener head is the first sign of a bigger water intrusion problem.
Our Mr-Glass Shingle, Tile & Metal Roofing Process
When you call us about a Mr-Glass roof, here is what happens, step by step, no mysteries:
- 1
The call. You reach a live person at (239) 453-7751. We ask what you’re seeing, where the leak is if there is one, and when it started.
- 2
The inspection. A background-checked, uniformed technician goes on the roof with the same checklist we use for every Mr-Glass installation: seams, flashing, penetrations, underlayment condition, fastener heads, and drainage slope.
- 3
The findings. We show you photos and explain exactly what is wrong and what can wait. You get a written, line-item estimate before any work starts. No change orders, no surprise add-ons.
- 4
Parts decision. If parts are needed, we tell you the OEM option and the quality aftermarket option with the price difference, and we tell you which we would put on our own roof. Labor is warrantied either way.
- 5
The repair. We do the job, test the repair with water where appropriate, and walk the roof once more to make sure we didn’t leave anything behind.
- 6
The guarantee. Every job carries the 36500-Day Done Right Promise. If it is not done right, we make it right. That is the whole promise.
What Mr-Glass Shingle, Tile & Metal Roofing Costs in Fort Myers
Pricing in Fort Myers depends on the material, the scope, and how far the damage has spread. Here are the ranges we typically quote:
- Mr-Glass shingle repairs: $250 to $600 for isolated damage like a few lifted or cracked shingles. Larger sections run $800 to $1,500.
- Mr-Glass tile repairs: $350 to $900 for a handful of cracked or dislodged tiles with re-bedding. Full underlayment replacement under a tile section runs $1,500 to $4,000 depending on the slope and access.
- Mr-Glass metal roof repairs: $300 to $700 for seam re-crimping and resealing. Fastener replacement across a roof face runs $800 to $2,000. Full panel replacement on a damaged area starts around $1,200 and goes up with panel gauge.
- Full Mr-Glass roof replacement: $12,000 to $35,000 in Fort Myers depending on material, square footage, and decking condition. We provide a written line-item quote, not a lump sum.
What moves the price: roof pitch, number of stories, access for equipment, and whether the decking is still solid. We give you the exact number before work begins, and the estimate is free. Call (239) 453-7751 to schedule yours.
Why Fort Myers Homeowners Call Winslow Windows & Doors for Mr-Glass Work
Ed Winslow’s name is on the door and on every job we do. We’ve been serving Fort Myers since 2011, putting our published address and license number on every estimate because you should know exactly who is standing on your roof. When a Mr-Glass roof needs attention, you get a technician who knows the specific ways these systems fail in the Fort Myers climate, not a rotating crew with a generic checklist. And because we are authorized installers for eight premium brands including PGT, CGI, CWS, and ES Windows, we understand how roof systems tie into the rest of the exterior, which matters when a roof leak is causing window trim or door frame damage on the same elevation. The 36500-Day Done Right Promise covers every Mr-Glass repair as much as it covers a full window replacement. We are the one down the road, and we answer the phone.
FAQs
In most cases, yes. As an independent Mr-Glass service provider, we perform repairs that do not void the manufacturer’s material warranty because we match the original installation methods and use compatible materials. We will tell you before any work starts if a specific repair could affect warranty coverage, and we document everything with photos and a written report for your records. Call (239) 453-7751 if you want to check your specific warranty language.
You talk to a live person at (239) 453-7751 any hour, and we schedule inspections based on urgency. An active leak gets priority over a gutter-grit concern. Most non-emergency inspections happen within a few days, and we tell you the window honestly when you call.
Repair makes sense when the damage is isolated and the roof has years of serviceable life left. Replacement makes more sense when repairs are stacking up faster than Fort Myers summers, when the decking is compromised, or when the roof is past the practical life of its underlayment or coating system. We will show you the numbers for both and give you our honest recommendation. Estimates are free.
We offer both, and we will quote both. For tiles and panels, OEM matches best when color and profile matter. For fasteners, underlayment, and sealants, we often recommend superior aftermarket products rated for Fort Myers coastal conditions, because the best material for the climate is not always the same one that came in the original box. The choice is yours, and the labor warranty is identical.
No. We give you a written line-item quote before any work begins, and that is the number you pay unless you approve a change in scope. If we find decking rot under a tile section, for example, we show you a photo and get your approval before adding a dollar to the invoice. No change orders, no surprises.
If your Mr-Glass roof is showing its age or you just want a second opinion on an estimate someone else wrote, call (239) 453-7751. The second opinion is free, the estimate is free, and so is the trip if you’re in the home county. My name is on the door, and it is on every roof we touch.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fort Myers and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After