Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterES Windows Window Replacement: The Fort Myers Owner’s Guide
We stock and install ES Windows-compatible replacement windows throughout Fort Myers, with most full-frame swaps running $850 to $1,900 per opening installed. If you’ve got an ES Windows unit with a failed seal, a cracked lite, or hardware that no longer latches, we can usually get it matched and scheduled within the week. Most owners discover the problem the same way: a fogged pane that won’t clear, a crank that spins without moving the sash, or a window that suddenly lets in road noise from Colonial Boulevard. You’re not looking for a whole-house project. You’re looking for one window done right.
Which ES Windows Models This Applies To
ES Windows builds several lines commonly installed across Lee County, and the replacement path depends on which one you have. The ES Premium series uses heavier aluminum extrusions and typically takes standard 5/8-inch or 1-inch insulated glass units, while the ES Impala and ES Elite lines use slimmer frames with slightly different glazing beads. Here’s the compatibility reality we deal with in Fort Myers: ES Windows has shifted frame profiles over the years, so a sash from a 2012 install won’t always drop into a 2019 opening even if the rough measurements look close. You need to match by the label, not just the tape measure.
If you can open the sash, look for a sticker on the frame edge or the top rail. It’ll show the series name and usually a manufacturing code. No sticker? A photo of the corner join and the glazing bead profile helps us identify it. For ES Windows specifically, we default to OEM glass and hardware when the series is still in production. For discontinued lines, we’ve had consistently good results with quality aftermarket equivalents that match the original sightlines. We’ll tell you which route makes sense before we quote a number, not after we’ve ordered parts.
Signs Your ES Windows Window Replacement Is Failing
- Condensation between the panes. The desiccant in the spacer has given up and the inert gas fill is gone. In Fort Myers humidity, this doesn’t dry out on its own. It means the sealed unit is done and the glass needs replacement.
- Sliding sashes that drag or jump the track. ES Windows rollers are nylon-tired and they wear flat over time, especially on windows facing afternoon sun. A window that used to glide now feels like it’s grinding on sand.
- Crank operators that spin free or bind. The gear teeth inside the operator strip after years of salt-air exposure and hard use. Once it slips, no amount of lubricant brings it back.
- Visible frame corrosion at the bottom corners. We see this most often on older ES Windows in homes closer to the Caloosahatchee or within a few blocks of the Gulf. Salt settles, sits in the tracks, and eats the aluminum from the inside out.
- A latch that won’t fully engage. Think about storm season. If the lock doesn’t seat, the window isn’t sealing, and a pressure-rated frame with a weak lock isn’t doing its job. This is the one we tell Fort Myers homeowners not to ignore.
Replacement Cost & What’s Included
In Fort Myers, expect $850 to $1,900 per opening installed for ES Windows replacement work. The spread comes down to size, glass package, and whether we’re replacing glass only, the sash, or the whole frame. Here’s how that breaks out:
- Glass-only replacement (failed IGU): $350 - $700 per unit, depending on size and glass type
- Sash replacement with matched ES Windows hardware: $450 - $900 per sash
- Full-frame tear-out and new ES Windows-compatible install: $850 - $1,900 per opening
Every quote is a written, line-item price. Parts and labor, no vague allowances, no change orders on the back end. Since 2011, Ed Winslow has run this company on one promise: the 36500-Day Done Right Promise. If the replacement isn’t right, we come back and make it right. That’s not a warranty card in a drawer. That’s our name on the truck and on the invoice.
DIY or Call Us?
You can check the label, measure the visible glass, and send us photos. That saves everyone time. But pulling an ES Windows sash apart, especially on an impact-rated unit, is where DIY goes wrong fast. These frames are engineered as a system. The glazing beads, the setting blocks, the drainage weeps, the hardware alignment, they all have to go back exactly right or the window won’t seal. And on upper-floor openings or oversized sliders, a sash can weigh more than you think and shift at exactly the wrong moment. We’ve rebuilt enough DIY attempts to say this plainly: replacing the glass yourself on an ES Windows impact unit usually costs more than hiring us the first time.
Call (239) 453-7751 and we’ll talk through what you’re seeing. If it’s a simple adjustment or a cleaning issue, we’ll tell you that on the phone. We’d rather earn the next job than sell you a part you don’t need.
FAQs
In Fort Myers, you should get 15 to 20 years out of an ES Windows frame before real problems start, but the glass seals and hardware typically need attention around year 10 to 12. Coastal salt air, daily UV, and the humidity cycle we live in every summer shorten that timeline compared to inland installs. Call (239) 453-7751 and we’ll give you an honest read on yours.
Yes, and we’ll tell you if repair is the smarter money. Replacing rollers, operators, and latch sets is routine for us. If the glass seal has failed or the frame is corroded through, repair stops making sense and honest replacement is the better call. We’ll show you why before you spend a dollar.
Most single-window replacements run two to four hours on site, from tear-out to clean-up. Glass-only swaps are typically under two hours. We schedule a set appointment, show up with the part in hand, and leave the work area broom-clean. Call (239) 453-7751 to get your job on the board.
We keep common ES Windows rollers, operators, locking hardware, and glazing components on our trucks so most repairs happen in one trip. Custom-sealed glass units are built to spec and usually ready within a week. We’re a local Fort Myers company with a stocked truck and a live person answering the phone at (239) 453-7751.
We understand ES Windows because we install them and we fix them. We also work on PGT, CGI, CWS, and the other brands you’ll find across Lee County. Winslow Windows & Doors is an independent, locally owned company, not affiliated with ES Windows. That independence means we give you the repair or replacement that serves your house, not a corporate parts policy.
Ed Winslow grew up in Miami and learned this trade through the building construction program at Miami Dade College before spending decades on frames, glass, and hardware across Florida. His name’s on the door, literally, and that means every ES Windows replacement we install in Fort Myers has to be right. A neighbor you can call at 2 a.m., and someone will actually answer. Upfront pricing, no surprises on the invoice. The one down the road.
Call (239) 453-7751 for a free estimate on your ES Windows replacement in Fort Myers. Ed’s name is on the door, and it’s on every job we do.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fort Myers and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.