Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterES Windows Custom & Geometric Windows in Fort Myers: What to Know First
ES Windows custom and geometric windows in Fort Myers typically cost between $2,800 and $11,000 per opening depending on glass package, frame finish, and whether the window is impact-rated. Most custom orders take 8 to 14 weeks from measurement to installation, while repairs on existing ES Windows units can often be completed in a single visit. We’re an independent ES Windows service provider in Fort Myers, which means we measure, order, and install these windows without any manufacturer sales agenda.
If you own a home with ES Windows and you’re dealing with a failing arched unit, a fogged geometric picture window, or an oversized opening that needs a custom impact solution, this page was written for you. Call (239) 453-7751 and a live person will answer, day or night.
Key Takeaways
- We install and service ES Windows custom and geometric units across Fort Myers, including impact-rated configurations.
- Typical custom window project: 8 to 14 weeks. Typical repair on an existing ES Windows unit: one visit, often same week.
- Free estimates, written line-item quotes, and no change orders once the job starts.
- Ed Winslow’s name is on the door, and the 36500-Day Done Right Promise is on every job.
How ES Windows Products Fail - and How We Fix Them
ES Windows builds a solid product, especially in the aluminum impact category. But we see the same failure patterns repeat across Fort Myers neighborhoods, from McGregor Boulevard ranches to newer Gulf-access builds. Here’s what actually goes wrong and what we do about it.
- Fogged glass in ES Windows “Grand Vista” units: The Grand Vista line shows up often in Fort Myers great rooms and second-story gable installations. The insulated glass unit seal eventually breaks down under constant Florida humidity cycling, and the argon escapes. Once that happens, you get permanent haze between the panes. We replace the IGU with a new sealed unit, not a rebuilt one, and we match the original glass package so the sightline stays consistent with the other windows in the room.
- Bowed frames in oversized ES Windows “WideView” configurations: WideView sliders and fixed panes are popular for capturing water views, but at widths over 96 inches we regularly see frame deflection from inadequate header support or improper shimming at original installation. The symptom is a window that binds mid-track or a frame that pulls away from the stucco at one corner. We remove the unit, correct the rough opening, and reset the frame with proper load distribution, not just caulk.
- Hardware fatigue on ES Windows crank-outs and awnings: The crank mechanism and multi-point locking hardware on ES Windows casement and awning units wear unevenly in coastal salt air. The operator gears strip, the lock points stop aligning, and the window won’t seal tightly. We replace the hardware with OEM ES Windows parts when available, and we’re honest when a quality aftermarket operator will last longer in Fort Myers salt exposure than the original spec. We’ll tell you the trade-off before we order anything.
- Weep system clogs in ES Windows horizontal sliders: Fort Myers gets 55 inches of rain a year, and the weep channels on ES Windows sliders are shallower than on some competitor brands. When they clog with pine needles, mulch dust, or lovebug debris, water pools in the bottom track and eventually finds its way inside, especially on east-facing elevations that take hard morning storms. We clean and re-angle the weep system and verify drainage before we call the job done.
- Geometric window gasket shrinkage on ES Windows shaped units: Arched tops, eyebrow windows, and trapezoids rely on perimeter gaskets to keep water out. Those gaskets shrink and harden after 8 to 10 years of direct sun, especially on south-facing elevations. The window looks fine until a driving rain pushes sideways. We replace the gasket with a new seal, and on larger geometric units we’ll check the structural glazing tape behind it before reinstalling the glass stop.
Our ES Windows Custom & Geometric Windows Process
When you call us about an ES Windows custom or geometric window in Fort Myers, here’s how the job actually goes.
- 1
Call and talk to a person: You reach a live human at (239) 453-7751, not a queue. We ask what you’re seeing, which windows are affected, and what part of Fort Myers you’re in.
- 2
On-site diagnostic visit: A background-checked, uniformed tech comes out, takes measurements, inspects the existing unit, checks the rough opening, and photographs everything. No trip charge inside our home county.
- 3
Parts and options decision: We determine whether OEM ES Windows parts are available and appropriate, or whether a quality aftermarket component will outperform the original in coastal conditions. For new customs, we spec the exact frame, glass package, and impact rating for your elevation and wind zone.
- 4
Written line-item quote: You get a fixed price before we order anything. No vague allowances, no change orders after the fact. If you already have a written estimate from another Fort Myers contractor, we’ll review it with you free.
- 5
Order or repair: For repairs, we schedule and complete the work, usually in one visit. For new custom windows, we order, track the lead time, and keep you posted. When the units arrive, we install, flash, seal, and trim them out.
- 6
Test and walkthrough: We operate the window, check seals, verify drainage, and walk you through what we did. If it’s not done right, the 36500-Day Done Right Promise means we come back and make it right.
What ES Windows Custom & Geometric Windows Costs in Fort Myers
Here’s what we’re seeing in the Fort Myers market right now. Prices are per opening and include materials and labor.
- ES Windows Grand Vista fixed geometric (36″ × 60″, non-impact): $2,800 - $4,200
- ES Windows Grand Vista fixed geometric (36″ × 60″, impact-rated): $4,500 - $6,800
- ES Windows arched top or radius unit (up to 72″ wide, impact): $5,200 - $8,400
- ES Windows WideView oversized sliding or fixed (96″ to 144″ wide, impact): $7,500 - $11,000+
- IGU replacement (fogged glass) on existing ES Windows unit: $480 - $1,100 depending on size, shape, and glass package
- Hardware replacement (crank operator or lock set): $180 - $420 per unit
What moves the price? Impact glass adds the most. True geometric shapes (trapezoids, triangles, eyebrow arches) cost more than rectangles because of fabrication waste and structural glazing. Oversized openings require reinforced frames and often a second set of hands on install day. Lead time and glass package availability also swing the final number. Call (239) 453-7751 for a free estimate and a written line-item quote. Seniors and veterans always get 10% off.
Why Fort Myers Homeowners Call Winslow Windows & Doors for ES Windows Work
We’ve been installing and servicing windows in Fort Myers since 2011, and Ed Winslow’s name has been on the truck every single day since. My name’s on the door, literally, which means every window and door we install has to be right. That’s not a slogan. It’s how we operate.
We answer the phone 24/7 with a live person. No voicemail loops, no national call center, no “we’ll get back to you within one business day.” When you call about an ES Windows unit that’s fogged, leaking, or binding, you talk to someone who knows what these windows cost and what they’re supposed to do in Florida weather.
We’re an independent ES Windows service provider, and we also install PGT, CGI, CWS, and ECO Window Systems. That matters when a replacement makes more sense than a repair, because we can show you options across brands without trying to force one lineup into every opening. If you have a written estimate from another company, we’ll give you a free second opinion on it. Those are the standing rules, not a limited-time offer.
FAQs
We are an independent ES Windows service provider and we do not administer manufacturer warranties. However, we can diagnose the issue, document it thoroughly, and handle the repair or replacement work whether it falls under warranty or not. If warranty coverage applies, we’ll point you toward the right process. Call (239) 453-7751 and we’ll help you figure out where you stand.
Most ES Windows custom and geometric orders take 8 to 14 weeks from final measurement approval to installation in Fort Myers. Impact-rated units and unusual geometric shapes add time. Repairs on existing units are usually scheduled within the same week. Call (239) 453-7751 and we’ll give you a realistic timeline for your specific window.
Fogged glass means the insulated glass unit seal has failed, and the fix is a new IGU, not a full window replacement. The frame is usually fine. We match the original ES Windows glass package, including tint, low-E coating, and impact rating, so the repaired unit looks consistent with the rest of the house. Most IGU replacements in Fort Myers are done in a single visit. Call (239) 453-7751 for a free estimate.
We use OEM ES Windows parts whenever they’re available and appropriate for the application. In some cases, a quality aftermarket part will hold up better in Fort Myers coastal conditions than the original specification, and when that’s true, we’ll tell you before we order anything. You get the trade-off explained in plain language, then you decide. Call (239) 453-7751 to discuss your window.
No. We give you a fixed written line-item quote before we order materials or schedule labor, and we don’t issue change orders after the fact. The only thing that changes a price is if you change the scope, and we’ll put that in writing too. Call (239) 453-7751 for a free estimate.
If you own a home in Fort Myers with ES Windows and something isn’t right, call (239) 453-7751. You’ll talk to a person. We’ll come out, look at the window, and give you an honest answer, whether that means a repair, a new IGU, or a full custom replacement. The one down the road, and always will be.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fort Myers and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.