Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCWS Roof Replacement & Installation in Fort Myers: What to Know First
CWS roof replacement and installation in Fort Myers is work we handle as an independent CWS service provider, and most full replacements are completed in two to four working days depending on roof size and whether we’re dealing with a full tear-off or a recover. Honest price posture: a CWS roof replacement on a typical Fort Myers ranch runs higher than budget shingle work because CWS builds a heavier gauge product, and that cost is real, not markup theater. Our estimates are written line-item quotes, and you’ll know the exact number before any material shows up on your driveway. This page is for Fort Myers homeowners who already have CWS roofing or who are weighing CWS for a replacement and want straight answers before they spend. If you’d rather talk it through, call (239) 453-7751 and a live person answers.
How CWS Products Fail - and How We Fix Them
We’ve torn off enough CWS panels in Lee County to recognize their failure patterns before the first shingle comes up. CWS is well-built metal roofing, but nothing in Florida weather fails gracefully. Here’s what we see most often on CWS jobs in Fort Myers:
- Flashing separation at the eave line on CWS residential standing seam. The thermal cycling between Fort Myers afternoon heat and evening thunderstorms works the sealant loose at the transition points. We see it most on older CWS installs where the original crew used butyl tape instead of a proper mechanical lock. Our fix is a full flashing replacement with stainless fasteners and a polyurethane sealant rated for Florida’s UV load, not a tube of caulk over the old bead.
- Fastener back-out on CWS agricultural and utility panels. The expansion and contraction of the panel beats the screws out over years, especially on south-facing roof planes that get hammered by the Lee County sun. The neoprene washers dry and crack, then moisture creeps in at the screw line. We remove every backed-out fastener, check the purlin for rot, and re-fasten with oversized screws and new washers, not just tighten what’s already failing.
- Oil canning that signals an underlying deck problem on CWS concealed-fastener systems. Some waviness is cosmetic from day one on metal roofing, but when oil canning shows up years after a Fort Myers install and gets worse through one season, it usually means the deck underneath is moving. We verify deck condition before we ever quote a replacement, because a new CWS panel on a compromised deck is just an expensive redo.
- Warranty voided by over-driven screws at the panel ribs on CWS corrugated profiles. We walk Fort Myers roofs and find screws buried so deep the panel is dimpled. That dimple collects water and salt spray, and it’s the exact kind of installation error CWS will point to when denying a finish claim. Our crews torque fasteners to specification and we document every phase with photos so the warranty stays intact.
- Improperly lapped end joints on CWS panels that cause leaks in summer downpours. Fort Myers gets afternoon storms that dump an inch of water in twenty minutes. If the uphill panel doesn’t lap the downhill panel the right direction, water runs backward into the seam. We see this on fast-and-cheap installs. Our replacement crews lap panels to CWS’s published minimums and check water flow direction on the actual roof slope, not the drawing.
Our CWS Roof Replacement & Installation Process
A CWS roof job through us follows a sequence we’ve refined over hundreds of Fort Myers installs. No skipped steps, no mystery days.
- 1
Initial call and site check. You call (239) 453-7751. We ask about your existing CWS roof, the age, what you’re seeing, and we schedule a visit. Inside our home county, there’s no trip charge.
- 2
Roof measurement and deck inspection. We don’t bid blind. A tech gets on the roof, measures every plane, checks deck condition, examines current CWS panel gauges and profile, and looks at the framing from the attic side where accessible.
- 3
Written line-item estimate. You get a documented price covering tear-off, disposal, underlayment, CWS panel procurement, flashing, fasteners, and labor. No verbal ballpark that changes later. If you have a written estimate from another Fort Myers contractor, we’ll give you a free second opinion on it.
- 4
Material ordering and permit pull. We order the exact CWS gauge, profile, and finish your roof requires. Permits are pulled by us, and the job is inspected by Lee County before you ever call it done.
- 5
Tear-off, underlayment, and CWS installation. Our background-checked, uniformed crew does the tear-off, installs the specified underlayment system, and sets the CWS panels with the fasteners and laps CWS specifies. The old roof leaves in our trailer, not your yard.
- 6
Final walkthrough and documentation. Ed or a senior lead walks the roof with you, you see the completed CWS install, and we leave you with photos, the inspection record, and the 36500-Day Done Right Promise behind it. If it’s not done right, we make it right. Period.
What CWS Roof Replacement & Installation Costs in Fort Myers
We quote CWS work honestly, and here’s the honest range based on jobs we’ve priced in Fort Myers and across Lee County:
- Full CWS exposed-fastener replacement on a 1,500 square foot ranch: $14,000 to $19,500, including tear-off, underlayment, panels, flashing, fasteners, and labor.
- Full CWS standing seam replacement on the same footprint: $22,000 to $31,000, with the difference driven by seam style, finish, and roof complexity.
- Partial CWS panel replacement around a failed penetration or damaged section: $2,800 to $6,500 depending on access and how many panels must be pulled.
- Deck repair discovered during any CWS job: $75 to $140 per sheet of plywood replaced, quoted and approved before we proceed.
What moves the price: roof pitch and access, number of penetrations, whether the deck needs work, and which CWS profile you choose. A two-story tile-roof re-slope on a canal-front Fort Myers home costs more than a ranch off McGregor, and that should be obvious, not hidden. Call (239) 453-7751 for a specific written quote. Estimates are free.
Why Fort Myers Homeowners Call Winslow Windows & Doors for CWS Work
Ed Winslow has been building and replacing roofs and exteriors in Florida since 2011, and his name is on the door. That’s not a metaphor; the business is Winslow Windows & Doors, and every CWS roof we install in Fort Myers carries the 36500-Day Done Right Promise. If it’s not done right, we make it right. Our techs are background-checked, uniformed, and know CWS panel behavior the way only years of Florida sun, salt air, and hurricane season teach. When your CWS roof needs attention, we’re the local crew that picks up the phone at 2 a.m. if a storm rips a panel loose. We also install PGT, CGI, ES Windows, and ECO Window Systems products, so when your roof complements new impact windows or doors, one crew handles the whole exterior. Upfront pricing, written estimates, and a permanent 10% discount for seniors and veterans. The one down the road.
FAQs
No, replacing CWS panels through an independent contractor like Winslow Windows & Doors does not void the CWS product warranty as long as the panels are installed to CWS specifications. We install to spec and document every step so your finish and material warranty stays enforceable. Call (239) 453-7751 and we’ll walk through your exact CWS profile and what the manufacturer requires.
Most CWS roof replacements in Fort Myers are completed in two to four working days once materials arrive, and we make a point of completing jobs in the spring before storm season presses everyone’s schedule. CWS panel lead times can run one to three weeks depending on the profile and finish, so call (239) 453-7751 early if you want the roof on before June.
We source CWS panels from approved distributors so the gauge, profile, and finish match the manufacturer’s published specifications. When a customer needs a discontinued CWS profile matched, we’ll tell you honestly if a true match is available or if we need to quote a different profile, and we won’t pad the number either way. Call (239) 453-7751 for the real lead time on your specific CWS panel.
Most CWS roofs can be partially repaired when the damage is isolated to one plane, a penetration, or a few panels, and full replacement is only necessary when the deck or large sections of panel show systemic failure. We’ll inspect before we recommend anything. Call (239) 453-7751 and we’ll tell you if you need five panels or fifty.
No, the price on your written CWS replacement estimate does not change unless you approve additional work like rotted deck replacement in writing before we proceed. No change orders slipped in at the end, no surprises on the invoice. That’s how Winslow Windows & Doors has done it since 2011.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fort Myers and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.