Mr-Glass Roof Replacement & Installation Nationwide | Winslow Windows & Doors

Mr-Glass Roof Replacement & Installation in Fort Myers: What to Know First

We provide independent Mr-Glass roof replacement and installation in Fort Myers, and most full replacement jobs wrap up within three to five working days once materials land on site. Cost depends on the roofing system you’re pairing your Mr-Glass products with, but expect to budget between $11,000 and $28,000 for a complete roof replacement on a typical Fort Myers single-family home. This page walks through exactly what that work involves when Mr-Glass components are part of the equation.

Call (239) 453-7751

If you own Mr-Glass windows or doors and your roof needs replacing, you’re likely wondering whether the roof work could damage your investment, or whether your Mr-Glass products should be upgraded at the same time. Both are fair questions. Call (239) 453-7751 and we’ll walk you through what makes sense for your home. Estimates are free.

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass builds solid impact-rated windows and doors, but like anything exposed to Fort Myers sun, salt air, and hurricane season, they develop predictable problems. Here’s what we see most often when a roof replacement and Mr-Glass products intersect:

• Frame-to-roofline flashing separation. On the Mr-Glass 5700 series fixed and picture windows installed directly under rooflines in older Fort Myers builds, the original flashing was often aluminum nailed over the window flange. After a decade of thermal cycling off McGregor Boulevard to the river, that flashing lifts and pulls away. A roof replacement is the single best time to fix it, because the roofer can re-flash the window correctly while the underlayment is exposed. We coordinate that handoff directly with our roofing crew, so your Mr-Glass window gets a watertight integration instead of another layer of caulk.
• Roof-deck water intrusion above the Mr-Glass 4520 sliding glass doors. Homes near the Caloosahatchee get wind-driven rain that finds the seam where the roof edge meets the patio header. When the roof underlayment degrades, water sneaks down behind the door’s top track and shows up inside as a slow drip that stains the interior casing. Replacing the roof gives us access to re-flash and re-seal that header properly. We’ve fixed this exact issue in homes from Whiskey Creek to Gateway more times than we can count.
• Leakage around Mr-Glass aluminum frame fasteners after roof work from other contractors. When a roofer isn’t paying attention, a nail or screw can puncture the window flange or frame during shingle removal. Years later, that’ll be a rust line and a leak. Our team sets clear boundaries around every Mr-Glass unit before roof work starts, masking and flagging those frames so no fastener gets near them.
• Impact-ratings and insurance documentation drift. Mr-Glass impact products carry specific Miami-Dade or Florida Building Code approvals, but those ratings live and die with the roof-to-wall and roof-to-window junctions. If your Fort Myers roof is being replaced with a different deck or underlayment system, that junction matters for your wind mitigation credits. We photograph and document every connection during a roof replacement, so you have a paper trail for your insurer.
• Condensation between the panes on older Mr-Glass dual-pane units. We see this most on Mr-Glass single-hung models installed in the 2000s on south-facing Fort Myers elevations. The seal eventually loses its fight with Florida humidity. A roof replacement won’t fix that, but it’s the right moment to know whether your windows still carry thermal performance, because if they don’t, you may want to upgrade while the house is already torn up.

Short version: if you’re already replacing the roof, it’s the cheapest moment you’ll ever have to correct Mr-Glass integration problems, because the roof edge is literally exposed.

Our Mr-Glass Roof Replacement & Installation Process

Every job follows the same path, whether it’s a full roof replacement with Mr-Glass flashing integration or a new roof that ties into existing Mr-Glass frames:

1. 1
   Call and talk to a live person. You reach us at (239) 453-7751, not a call center. We hear what you’re dealing with and book a free estimate. No trip charge inside our home county.
2. 2
   On-site roof and Mr-Glass assessment. We inspect the roofing system, the condition of every Mr-Glass frame the roof touches, and any existing flashing. We look for the exact failure modes listed above and photograph everything.
3. 3
   Written line-item quote. You get a number that doesn’t change once work starts. It covers tear-off, underlayment, deck repair if needed, roof covering, flashing integration with your Mr-Glass units, permits, and cleanup. Ed’s signature is on it.
4. 4
   Protected roof replacement. Our crew shields every Mr-Glass window and door near the work zone. We replace the roof and re-flash all Mr-Glass junctions using materials compatible with the existing frames. We use OEM Mr-Glass flashing and sealants when we can get them, and name-brand pro-grade alternatives when the original product is no longer manufactured.
5. 5
   Water-test and documentation. We run water on every seam before we call the job finished. Then we photograph the integrated flashing and hand you documentation you can use with your insurer.
6. 6
   Walkthrough and the 36500-Day Done Right Promise. If something isn’t right, we come back and fix it. That promise has no fine print and no expiration. It’s Ed’s name on the truck and on every job.

What Mr-Glass Roof Replacement & Installation Costs in Fort Myers

Here’s what we’re currently seeing in the Fort Myers market for roof replacements and installations that involve Mr-Glass window or door integration. These are full-project ranges, not just the window-adjacent work:

• Asphalt shingle roof replacement, ranch home, Mr-Glass flashing integration: $11,000 - $16,500
• Tile roof replacement, single-story, Mr-Glass flashing integration: $18,000 - $27,000
• Metal roof replacement, standard lot, Mr-Glass flashing integration: $19,000 - $28,000
• Re-flashing existing Mr-Glass units during roof replacement: $400 - $1,200 per window or door, depending on access and condition

What moves the price: roof pitch, square footage, deck condition, whether you’re on the water in Fort Myers Beach or inland off Daniels Parkway, and whether any Mr-Glass frames need repair before re-flashing. We’ll give you a fixed number before work starts, not after. Call (239) 453-7751 for an exact quote on your place. Estimates are free and the second-opinion offer is always on the table if you’ve already got a written estimate from someone else.

Why Fort Myers Homeowners Call Winslow Windows & Doors for Mr-Glass Work

We’ve been serving Fort Myers since 2011. Ed Winslow grew up in Miami, learned the trade through the building construction program at Miami Dade College, and has spent decades working on frames, glass, and hardware built for Florida’s climate. His name is on the door literally, and that means every Mr-Glass window and roof junction we touch has to be right.

We answer the phone 24/7 with a live person. Every technician who pulls up to your house is background-checked, uniformed, and knows exactly what they’re doing with Mr-Glass products specifically. And because we’re also an authorized installer for PGT, CGI, CWS, and ES Windows, we understand how Mr-Glass products work alongside other impact-rated systems in the same home. That matters when a roof replacement touches windows from more than one brand.

Upfront pricing. No surprises on the invoice. If it’s not done right, we make it right. That’s the whole arrangement.

FAQs