Mr-Glass Impact Windows Nationwide | Winslow Windows & Doors

Mr-Glass Impact Windows in Fort Myers: What to Know First

Mr-Glass impact windows in Fort Myers typically cost $850 to $1,900 per opening installed, depending on the series and size. As an independent Mr-Glass service provider, we repair and replace these windows throughout Lee County, usually completing full-window replacements within one to three days once materials arrive. The honest pricing posture is simple: you get a written line-item quote before we start, and that number does not change. My name’s on the door - literally. That means every window and door we install has to be right.

Call (239) 453-7751

This page is for Mr-Glass owners in Fort Myers who’ve noticed fogged glass, a sticky roller, a latch that won’t catch, or water pooling on the sill after a storm. If that’s you, call (239) 453-7751 for a free estimate, and someone will actually pick up.

We’re Winslow Windows & Doors, locally owned since 2011 by Ed Winslow. We’ve worked on Mr-Glass units in ranch homes off McGregor Boulevard, canal-front properties near the Caloosahatchee, and newer construction in Gateway. The brand shows up all over this town, and so do the same few failure patterns.

Key Takeaways:

• We service and replace Mr-Glass impact windows as an independent provider - not a manufacturer-authorized dealer, which means we can be blunt about what actually fails.
• Most Mr-Glass repairs in Fort Myers run between $185 and $600; full replacements run $850 to $1,900 per opening.
• Every job is backed by the 36500-Day Done Right Promise. If it’s not done right, we make it right.
• Call (239) 453-7751 for a free estimate. Live answer, 24/7.

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass impact windows hold up reasonably well in Florida, but we see the same handful of problems across Fort Myers neighborhoods, from older Sun Coast communities to newer builds east of I-75. Here’s what actually goes wrong, based on what lands on our workbench:

• Glass seal failure on the 8800 series fixed-lite units. After years of direct Fort Myers sun and salt air, the seal between panes on older 8800-series picture windows breaks down, leaving a permanent haze between the glass. This isn’t a cleaning problem; it’s a failed insulating glass unit. We replace the sealed glass pack, not the whole frame, which saves you hundreds and keeps the original impact rating intact.
• Roller drag on horizontal sliders, especially the 7600 line. Mr-Glass slider rollers sit in a track that collects sand and shell grit from Florida landscaping. Once grit embeds in the nylon roller, the window gets harder to slide, then the roller chews the track, and suddenly the panel doesn’t seal tight against the jamb. We clean the track, replace the roller with an OEM-equivalent, and re-align the panel so the strike points line up again.
• Interlock misalignment on casement units. Mr-Glass casement windows rely on a multi-point lock engaging the interlocks at the top and bottom of the sash. In Fort Myers homes with settling slabs or shifting soil, the sash can drop by an eighth of an inch, just enough that the lock binds. We re-square the sash, adjust the hinge arms, and if the hardware is stripped, install new lock points. The window doesn’t need to be torn out for this.
• Weep-channel blockage on impact rated single-hung windows. Fort Myers gets its share of wind-driven rain, and Mr-Glass windows drain through small weep holes at the bottom of the frame. When those clog with pollen, dirt, or tiny lizard skeletons (it happens), water pools inside the track and eventually seeps into the drywall below the window. We clear the weeps, flush the track, and confirm the interior drain slope is still pitched correctly.
• Laminated glass stress cracks on large picture windows. We’ve seen hairline cracks running from the edge of large Mr-Glass fixed-lite units in Fort Myers homes that face strong afternoon sun. It’s usually a combination of edge pressure from an over-shimmed frame and thermal stress. The fix is reseating the glass with proper setting blocks and edge clearance, then replacing the laminate if the crack has spread.

Our Mr-Glass Impact Windows Process

When you call about a Mr-Glass issue, here’s how the job goes from first call to final walkthrough:

1. 1
   The call. You call (239) 453-7751. A live person answers. We ask what the window is doing, what Mr-Glass series it is, and when you first noticed the problem. Then we schedule a time that works for you. No trip charge inside Lee County.
2. 2
   The inspection. A background-checked, uniformed technician shows up, introduces himself by name, and examines the window. We measure frame square, check glass condition, test hardware, and look at how the unit was installed. We explain what we’re seeing in plain English, not contractor shorthand.
3. 3
   The parts decision. For hardware repairs, we use OEM Mr-Glass parts when they’re available and priced sanely, or quality aftermarket equivalents when the OEM part is backordered or discontinued. For glass replacement, we use laminated impact-rated glass that meets the same Florida Building Code requirements as the original. We’ll tell you which path we recommend and why.
4. 4
   The written quote. You get a line-item estimate before any work starts. The price on that sheet is the price you pay. No change orders, no “we discovered hidden damage” upcharges. If we find something while working, we stop and call you.
5. 5
   The repair or replacement. We make the fix, install the new window, or replace the glass. We clean up when we’re done. The work area looks like we weren’t there.
6. 6
   The test and the guarantee. We operate the window in front of you, show you the seal and lock engagement, and walk through what we did. Then we remind you about the 36500-Day Done Right Promise: if it’s not done right, we come back.

What Mr-Glass Impact Windows Costs in Fort Myers

Here are realistic ranges for the Mr-Glass work we do most often in Fort Myers, based on what we’ve quoted over the past few years:

What moves the price: window size, Mr-Glass series (7600, 7800, 8800, and custom geometric shapes all cost differently), whether the frame can be saved or the whole unit needs pulling, and whether the opening is on a second floor or requires a lift. Call (239) 453-7751 for a written estimate. It’s free, and there’s no trip charge in Lee County.

Why Fort Myers Homeowners Call Winslow Windows & Doors for Mr-Glass Work

There are plenty of companies in Fort Myers that will quote a window job. Fewer will tell you the truth about your Mr-Glass unit, and fewer still will back that truth with a promise that lasts a century. We’ve been in business since 2011, locally owned, owner-operated, with a published address and license number. Ed Winslow’s name is on the truck and the invoice. We install eight authorized brands - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - so when a Mr-Glass window isn’t worth saving, we’re not trying to squeeze a repair out of it. We’ll tell you straight: repair it, replace it, or leave it alone. Senior and veteran customers get 10% off, permanently. And when you call at midnight with a window that won’t secure, a live person answers. That’s not a perk. It’s simply how we run our company. The one down the road.

Frequently Asked Questions