ES Windows Shingle, Tile & Metal Roofing Nationwide | Winslow Windows & Doors

ES Windows Shingle, Tile & Metal Roofing in Fort Myers: What to Know First

ES Windows shingle, tile and metal roofing in Fort Myers means one thing: the glass is only as good as the frame and flashing around it. We’re an independent ES Windows service provider, and most of the roof-adjacent failures we see aren’t the glass at all. They’re the result of water finding the gap where the roof system meets the window. Typical turnaround on a shingle, tile or metal roofing repair that involves ES Windows integration runs one to three days once we’ve sourced the right flashing and sealant kit. If you’re reading this because water is already coming in around an ES window, call (239) 453-7751 and we’ll get you on the schedule.

Call (239) 453-7751

How ES Windows Products Fail - and How We Fix Them

ES Windows builds a serious product. But Florida weather has a way of finding every weak seam. Here’s what we see on Fort Myers homes, series by series:

• ES Windows ES7500 series: sill pan corrosion at the roof line. On homes where shingle or tile roofing butts directly against an ES7500 frame, the original sill pan often wasn’t sloped correctly. Water pools, sits against the aluminum, and over three or four wet seasons the finish starts to bubble and the gasket loses its grip. We pull the lower trim, reset the pan on a proper slope, and re-flash so water can’t pool again.
• ES Windows ES9000 impact series: roof-to-frame flashing separation. The ES9000 is heavy. When roofers replace tile or metal around it, the new flashing sometimes gets nailed too tight to the frame. Thermal expansion does the rest. You’ll see a hairline gap, then a water stain on the drywall below. We re-flash with expansion-tolerant sealant and overlap the new roof membrane correctly.
• ES Windows ES6800 horizontal slider: track weep holes clogged by roof debris. On Fort Myers homes with barrel tile roofs, wind carries grit and tile dust straight into the slider track. The weep holes plug, water backs up, and the track drains into the wall cavity instead of outside. We clear the weeps, clean the track channels, and apply a debris-shedding cap if the window sits under a roof valley. This is a fix you won’t find on the ES Windows site because it’s a climate-specific failure, not a design flaw.
• ES Windows ES7200 casement: frame rack from shifting roof load. Older Fort Myers ranch homes off McGregor Boulevard carry heavy concrete tile. When the roof settles or a truss shifts, the window opening flexes. The ES7200 casement crank binds, the sash won’t seal, and the corner welds start to work loose. We re-square the opening, shim correctly, and re-hang the sash so the crank operates like it did on day one.
• ES Windows ES8500 fixed picture window: interior condensation mistaken for seal failure. In Fort Myers humidity, an ES8500 sitting under a metal roof that radiates heat will sweat on the interior glass. Homeowners think the insulated glass unit failed. Most of the time the IGU is fine; the real issue is a missing thermal break in the rough opening. We insulate the cavity, add a proper vapor barrier, and the condensation stops. No glass replacement needed.

Our ES Windows Shingle, Tile & Metal Roofing Process

Here’s how a typical ES Windows roofing-related repair goes when you call Winslow Windows & Doors:

1. 1
   You call. A live person answers, day or night. You’re not leaving a voicemail.
2. 2
   We diagnose on site. A background-checked technician arrives in uniform, inspects the window, the flashing, the roof junction, and the interior wall. We name the exact failure before touching a tool.
3. 3
   We write a line-item quote. No ballparks, no “we’ll see once we open it up.” You’ll see the price before we start.
4. 4
   We source the right parts. OEM ES Windows seals and hardware where the warranty requires it; proven aftermarket flashing and sealant where it performs better in the Fort Myers climate. We tell you which is which and why.
5. 5
   We fix it, then test it. Water-test the flashing, cycle the sash, check the weeps, and confirm the roof-to-frame seal with a moisture meter.
6. 6
   We back it with the 36500-Day Done Right Promise. If it’s not done right, we make it right. Ed’s name is on the door, and on every job we do.

What ES Windows Shingle, Tile & Metal Roofing Costs in Fort Myers

Here’s honest pricing for the ES Windows work we do most often in Fort Myers, including the roof integration:

• Weep hole clearing and track service: $95-$180 per window
• Re-flashing an ES window at the roof junction: $350-$750 per window, depending on roofing material
• Sill pan reset and re-slope (ES7500/ES7200): $400-$800 per window
• Frame re-squaring and sash re-hang (ES7200 casement): $500-$900 per window
• Full ES Windows replacement with new roof flashing: $1,800-$4,200 per unit, depending on series and glass package

What moves the price: roof material (tile and metal take more labor than shingle), window series, and whether we’re repairing or replacing. We offer a free second opinion on any written estimate, $40 off any repair over $200, no trip charge inside Lee County, and a permanent 10% discount for seniors and veterans. Call (239) 453-7751 for your free estimate.

Why Fort Myers Homeowners Call Winslow Windows & Doors for ES Windows Work

We’ve been in business since 2011 and we’re locally owned by Ed Winslow, with a published address and license number. That matters when you’re trusting someone with a window that has to hold up under Fort Myers heat, salt air, and the occasional named storm. Our technicians are background-checked and arrive in uniform, so you know exactly who’s at your door before the truck pulls up. And because we’re authorized installers for PGT, CGI, CWS, ECO Window Systems, and Therma-Tru, we can give you a straight answer about whether an ES Windows repair makes sense or whether a different brand’s replacement is the smarter long-term play. My name’s on the door, literally. That means every window and door we install has to be right.

FAQs