Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterES Windows Impact Windows in Fort Myers: What to Know First
We repair and replace ES Windows impact windows throughout Fort Myers as an independent service provider, with most repairs completed in a single visit and full replacements typically scheduled within two to three weeks. A standard ES Windows impact window repair in Fort Myers runs between $140 and $480 depending on the failure, while full replacement of an ES Windows unit usually lands between $900 and $2,400 per opening. If you own a home off McGregor Boulevard, in Gateway, or anywhere else in Lee County and your ES Windows aren’t sealing, sliding, or latching the way they should, call (239) 453-7751 and Ed or a member of our crew will pick up.
This page is for Fort Myers homeowners who already have ES Windows impact windows, or who are considering them, and want straight answers from a local crew that works on them every week. We’re not a call center and we’re not affiliated with ES Windows the manufacturer. We’re the local alternative: independent, experienced, and accountable to you, not a headquarters.
How ES Windows Products Fail - and How We Fix Them
Every impact window brand has its own personality, and after years of servicing ES Windows across Fort Myers, we know exactly where their units show stress. Here are the failures we see most, what’s actually causing them, and how we address each one.
- Interlocking sashes that bind at the meeting rail - On ES Windows horizontal sliders and single-hung units, particularly the 7000 and 8000 series we see in older Fort Myers homes, the aluminum interlock between sashes is the first casualty of daily use. Florida humidity swells the weatherstripping and grit from afternoon thunderstorms works into the track, then the interlock jams. Our fix is a full disassembly, track cleaning, and replacement of the interlock with a fresh OEM or matched aftermarket component, not a silicone patch that fails in six months.
- Failed glass-to-frame seal on ES impact laminated units - Fort Myers heat cycles are brutal on the structural silicone ES Windows uses between the laminated glass and aluminum frame. When that seal degrades, you get interior fogging even though the unit still looks intact from the outside. That fog means moisture is in the glazing channel, and over time it degrades the interlayer that gives the window its impact rating. We replace the seal properly, re-bed the glass, and reset the glazing bead so the unit drains and breathes like it should.
- Roller and track wear on ES 7000 series sliders - The 7000 series is a workhorse, but the factory rollers are under-spec’d for the weight of laminated impact glass when doors get used heavily. We see homes with pool decks or lanai access where the slider gets opened thirty times a weekend. Our upgrade is a heavier stainless roller assembly paired with a full track inspection and adjustment, which restores smooth operation without changing the look of the unit.
- Snapped mullion alignment on multi-panel ES assemblies - Homes in Fort Myers newer developments often have triple-panel ES Windows units where a single mullion takes wind load differently than the panels beside it. Over a few hurricane seasons, we see units shift slightly out of square, which throws off latching and seal compression at the corners. We re-square the assembly, re-shim the mullion, and torque the frame anchors to spec, which fixes the latch issue at its actual source.
- Fogging at the corners of ES insulated impact glass - This is the failure that gets misdiagnosed most often. Corner fogging on ES Windows impact units doesn’t necessarily mean the seal failed from the outside. In many Fort Myers houses we’ve serviced, the culprit is poor original flashing or sill pitch that channels roof runoff directly onto the glazing beads. Before we touch the glass, we check the water path above the window, because replacing the unit without fixing the drainage means the new one will fog the same way in two years.
Our ES Windows Impact Windows Process
When you call (239) 453-7751 with an ES Windows problem, here’s how the job goes from first call to final walk-through.
- 1
The call - A live person answers, 24/7. You describe the symptom: fogging, sticking, latch failure, water at the sill. We ask for photos if you have them, and we schedule a visit.
- 2
On-site diagnostics - We come to your Fort Myers home, inspect the unit in place, and figure out the actual cause. We don’t quote a repair until we know what failed and why.
- 3
Parts decision - Where an ES Windows OEM part is the right call, we use it. Where a quality aftermarket part performs as well or better for less money, we present both options with plain-English trade-offs and let you choose.
- 4
The repair - We do the work in place wherever possible, which keeps your opening protected and the job fast. When a unit needs full replacement, we remove it carefully enough that surrounding stucco and trim don’t need patching afterward.
- 5
Testing - Every ES Windows repair we finish gets tested for operation, seal, and latch engagement before we call it done. We check the drainage path and the thing that caused the failure in the first place.
- 6
The guarantee - Our workmanship warranty is the 36500-Day Done Right Promise. If it’s not right, we come back and make it right. That’s Ed Winslow’s name on the guarantee, and it’s been that way since 2011.
What ES Windows Impact Windows Costs in Fort Myers
Fort Myers pricing for ES Windows work depends on the failure, the unit size, and whether parts come from ES Windows or the aftermarket. Here’s what we typically see.
- Track and roller service on a slider: $140-$320
- Interlock or weatherstripping repair: $160-$380
- Seal replacement and re-bed: $220-$550
- Full unit replacement (single opening): $900-$2,400 depending on size and series
- Triple-panel assembly re-square and re-torque: $350-$700
What moves the price is whether the failure is mechanical (rollers, latches, interlocks) or glass-related (seal, fogging, impact damage), and whether the unit is an older series where parts have to be sourced carefully. We give written, upfront pricing before work starts, and we don’t change the number once we’ve agreed to it. Call (239) 453-7751 for a free estimate on your ES Windows repair or replacement.
Why Fort Myers Homeowners Call Winslow Windows & Doors for ES Windows Work
We’ve been serving Fort Myers since 2011, and Ed Winslow’s name is on the door and on every job we do. We’re not a franchise crew that cycles through technicians every quarter. The same local team you see today is the one you’ll call in three years when a different window needs attention. We’re authorized installers for eight premium brands including PGT, CGI, CWS, and ECO Window Systems, so if your ES Windows need more than a repair and you’re weighing options, we can show you side-by-side comparisons without a sales pitch. Our technicians are background-checked and uniformed, you’ll know who’s pulling up to your house. And if you have a written estimate from anyone else, we’ll give you a free second opinion. Seniors and veterans get 10% off permanently, and any repair over $200 takes $40 off, always.
FAQs
In most cases, yes. As an independent ES Windows service provider, we can perform repairs that don’t involve altering the frame or glass in ways that void coverage. Where a repair would touch warranty-covered components, we’ll tell you up front and walk through your options. The rule we follow is simple: never do work that costs you coverage without you knowing it first.
Most common parts (rollers, interlocks, weatherstripping, locking hardware) are on our truck or available within a few days through our parts relationships. Glass units take longer because they’re made to spec. Expect one to two weeks for replacement glass, and we’ll confirm the exact timeline before you commit. Call (239) 453-7751 and we’ll tell you exactly what applies to your unit.
Repair if the failure is mechanical (latch, roller, track, interlock), if the glass is intact, and if the frame is square. Replace if the glass seal has failed, the impact interlayer is compromised, or the frame has corrosion that compromises the unit’s rating. The honest answer for most fogged units in Fort Myers is replacement, because re-sealing impact glass rarely buys you more than a couple of years.
Both. We install new ES Windows units and also service existing ones. When it’s time for new impact windows, we’ll show you ES Windows alongside PGT, CGI, CWS, and ECO Window Systems so you can compare actual performance and price, not just brochures.
Most repairs fall between $140 and $550. Full unit replacements run higher, from $900 to $2,400 per opening depending on size and series. The only way to know for sure is a quick in-person look, which is free to schedule at (239) 453-7751.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Fort Myers and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.