Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterArched & Curved Windows in Fort Myers, FL
Arched and curved windows in Fort Myers can be custom-fabricated and installed in one to three weeks, depending on size and profile, and typically cost between $650 and $2,800 per unit installed – impact-rated glass included. At Winslow Windows & Doors, we’ve been measuring, ordering, and fitting our Custom & Geometric Windows services across Fort Myers since 2011, and Ed Winslow personally oversees every custom job that goes out the door.
Curved and arched openings are some of the most character-defining features on a home. They’re also the easiest to get wrong. A standard-window installer who rarely touches custom shapes will either push you toward a filler solution – half-moon trim over a flat glass unit – or order a frame that’s slightly off and then caulk the gap and hope you don’t notice for a few years. We don’t do either of those things. Our work on arched and curved windows is part of our broader Custom & Geometric Windows in Fort Myers service, and every unit we install is built to spec, impact-rated for Southwest Florida conditions, and covered under our 36500-Day Done Right Promise. If it’s not right, we come back. Full stop.
You can reach us any hour at (239) 453-7751 – a live person answers, not a machine. Free estimates on custom windows are part of how we work. There’s no trip charge for homes inside Lee County.
When You Need Arched & Curved Windows
Geometric & Shaped Windows like these show up in all kinds of Fort Myers homes – from the older Mediterranean-revival styles in McGregor Boulevard’s historic corridor to newer construction in Estero and Gateway. Here’s when homeowners typically call us:
- Your existing arched unit is leaking or fogging. When the seal on a curved insulated glass unit fails, you’ll see condensation trapped between the panes. This is especially common after a Fort Myers summer when daily thunderstorms push humidity into any compromised seal. A fogged unit can’t be defogged – it needs replacement.
- Your home has a decorative arch but no functional glass. Some builders fill arched openings with wood, drywall, or solid panels. If you want natural light without sacrificing impact protection, we can retrofit a true curved window into an existing opening.
- You’re upgrading to impact-rated glass and the arch isn’t standard. Replacing your flat windows with PGT or CGI impact units is straightforward. But if you have an arched transom above your entryway or a half-round over a living room window, those need to be ordered as custom impact units – not left as non-rated glass while everything else is updated.
- An older arch is cracked, chipped, or the frame has rotted. Fort Myers salt air and humidity are hard on aluminum frames and wood composite sills. We see a lot of frame degradation in homes that are 15 to 25 years old, particularly in neighborhoods close to the Caloosahatchee or near Cape Coral’s canal system where airborne salt is a daily reality.
- You’re building new or adding a room addition. If your architect has drawn in a curved or arched feature window, you need an installer who can read those drawings accurately and source a unit that matches both the radius and the local wind-load requirements for Fort Myers’ high-velocity hurricane zone.
- Your current arch doesn’t match the rest of the home after a remodel. After a major interior renovation, homeowners in Pelican Landing and Reflection Isles often find that their dated single-pane arch looks wrong next to new double-pane impact windows throughout the house. We can match profile, glass tint, and frame color so everything reads as one cohesive exterior.
Our Arched & Curved Windows Process
Custom openings require more precision upfront than a standard rectangle. Here’s exactly how a typical arched or curved window job unfolds with us:
- On-site measurement and radius templating. We start by building a physical template of the arch – not just recording dimensions on a clipboard. For true radius curves, even a quarter-inch error at the manufacturer translates to a gap or a forced fit at installation. Ed or a member of his crew does this step personally on custom jobs. We also confirm the rough opening condition: if the framing is soft or there’s old moisture damage around the sill, we flag it before the order is placed, not after the new unit arrives.
- Manufacturer order and product selection. We match the unit to your home’s needs. For most Fort Myers homes, that means an impact-rated arched unit from PGT or CGI – both manufacture custom-radius products built to Florida Building Code and HVHZ (High-Velocity Hurricane Zone) standards. We’ll walk you through glass options: clear, low-E, or lightly tinted to manage solar heat gain, which matters a lot on a west-facing arch in Fort Myers’ afternoon sun. Lead times are typically 10 to 21 business days for custom curved units.
- Pre-installation inspection of the opening. When the unit arrives at our shop, we dry-fit it before the truck goes to your house. Any deviation gets caught here. We also inspect the existing opening for structural integrity, flashing condition, and sill plate levelness. Fort Myers’ wet seasons are hard on rough openings, and an arch that’s settled even slightly out of plumb can cause premature seal failure if it’s not corrected before the new unit goes in.
- Installation day. Our background-checked, uniformed crew arrives in the window agreed on – and if anything changes, we call ahead. Curved window installation takes longer than a standard unit because the perimeter seal has no straight lines to shortcut. We use low-expansion foam appropriate for curved frames, set the unit in the opening with shims, and then apply flashing tape and sealant in a specific sequence that meets Florida Product Approval requirements. We don’t rush this step.
- Post-installation inspection and cleanup. Before we leave, we check the unit from both inside and outside: operation (where applicable), seal integrity, alignment, and glass clarity. We photograph the finished installation. Interior and exterior areas around the opening are cleaned, and any removed trim or casing is reset or new casing is installed to finish the opening cleanly.
- Permit and documentation handoff. Many arched window replacements in Fort Myers require a permit, particularly when the unit is impact-rated or when structural framing is involved. We pull the permit on your behalf where required, schedule the inspection, and hand you the completed paperwork – including the product approval documentation – for your records and future resale disclosure.
Arched & Curved Windows Pricing in Fort Myers
Arched and curved windows in Fort Myers cost more than comparable rectangular units, and that’s true regardless of who installs them. The custom fabrication, extended lead time, and more involved installation are the reasons. Here’s what drives the number:
| Unit Type | Typical Installed Price Range |
|---|---|
| Small half-round or elliptical transom (up to 24″ wide) | $650 – $950 |
| Mid-size half-round transom (24″ – 48″ wide) | $950 – $1,400 |
| Full arch or eyebrow window (48″ – 72″ wide) | $1,400 – $2,100 |
| Large statement arch or curved picture window (72″+) | $2,100 – $2,800+ |
| Frame repair or rough opening correction (if needed) | $150 – $600 additional |
These ranges reflect impact-rated glass, standard aluminum frames in white or bronze, and typical installation conditions in Fort Myers. A few factors push the number higher:
- Glass upgrades – low-E coatings, impact-laminated laminates with specific SHGC ratings, or specialty tints
- Non-standard radius profiles or compound curves
- Second-story installation requiring additional rigging or equipment
- Structural framing repairs to the rough opening discovered during removal of the old unit
- Permit fees, which vary by Fort Myers jurisdiction (City of Fort Myers vs. Lee County unincorporated areas have slightly different fee schedules)
We also offer $40 off any repair over $200, a 10% discount for seniors and veterans, and a free second opinion on any written estimate you’ve already received from another company. Call us at (239) 453-7751 and we’ll give you a straight number after measuring the opening – no ballpark guessing.
Why Fort Myers Homes Need Impact-Rated Arched Windows
Fort Myers sits squarely inside Florida’s High-Velocity Hurricane Zone designation. That means any new window installation – including arched and curved units – must meet HVHZ product approval standards under the Florida Building Code, which is why we specialize in Custom Impact Windows. A decorative arch that looks beautiful but isn’t rated for 150+ mph wind loads is a liability in a named storm, and it will fail a permit inspection.
Beyond storm protection, Fort Myers’ climate puts specific stress on non-standard windows. The city averages around 271 sunny days per year, and west- or south-facing arched windows take a serious solar heat load every afternoon. A low-E glass option on an arched unit in a home in Verandah or Colonial Country Club can meaningfully reduce cooling costs in a room that otherwise heats up significantly between noon and 4 p.m. We factor this into our recommendations – it’s not an upsell, it’s math.
Salt air from the Gulf and the Caloosahatchee also accelerates frame corrosion on older aluminum units. If your existing arch has visible pitting, oxidation, or a frame that flexes when you press on it, that’s not cosmetic – it’s a seal integrity issue that a storm will expose. We see this regularly in homes in Fort Myers Beach, Iona, and Cape Harbour that are more than 15 years old.
As an authorized installer for PGT and CGI, we source units that are already Florida-approved and HVHZ-compliant. That paperwork matters when you sell the home and the buyer’s inspector asks for documentation on the windows.
What Makes Arched Windows Different to Install
Most window installers work primarily with rectangular units. The skills transfer, but the details don’t. A curved perimeter means there are no corners to anchor to, no straight runs of flashing tape, and no standard-width sealant bead that a crew can apply quickly by habit. The radius has to match the opening exactly or you end up with voids that trap water – and in Fort Myers, water that sits in a void has a short path to mold.
The other difference is framing. Arched rough openings in Fort Myers homes are often built with curved headers made from laminated lumber or curved steel. When that framing is sound, installation is straightforward even for Oversized Openings. When it’s deteriorated – which happens, especially in homes built in the 1980s and 1990s when some builders used less durable composite lumber in non-load-bearing arches – the opening needs to be rebuilt before the new unit goes in. We scope this during measurement so there are no surprises on installation day.
We’ve been doing this work in Fort Myers since 2011. The arched transom above a front door in the McGregor corridor is a different project from a full curved picture window on the second floor of a new build in Miromar Lakes, and we approach each one with the specific preparation it requires.
The 36500-Day Done Right Promise
Every arched and curved window we install in Fort Myers is backed by our 36500-Day Done Right Promise. The name isn’t an accident – 36,500 days is 100 years. It’s our way of saying that if the work isn’t done right, we make it right, full stop. No loopholes in the warranty language, no depreciation arguments, no “that’s a manufacturer issue, call them.” Ed’s name is on this business, and his personal accountability is the warranty.
We also know that arched windows aren’t impulse purchases. Homeowners who call us about a curved unit have usually been thinking about it for a while, gotten one estimate that felt vague, and are looking for someone who will give them a straight answer. That’s what we do. You can also visit our home page to see the full range of services we cover if you’re working through a larger exterior project at the same time.
Key Takeaways
- Arched and curved windows in Fort Myers are custom-ordered units – typical installed cost runs $650 to $2,800+ depending on size and glass spec.
- All replacements in Fort Myers must be HVHZ-rated; PGT and CGI both manufacture compliant curved units that we install as authorized dealers.
- Lead time on custom curved units is typically 10 to 21 business days from order confirmation.
- We pull permits on your behalf where required and handle the inspection scheduling.
- The 36500-Day Done Right Promise covers every install – if it’s not right, we come back.
- Seniors and veterans receive 10% off. $40 off any repair over $200. Free second opinion on written estimates. No trip charge inside Lee County.
- A live person answers at (239) 453-7751 any hour of the day.
FAQs – Arched & Curved Windows in Fort Myers
How much does an arched window replacement cost in Fort Myers?
An arched window replacement in Fort Myers typically costs between $650 and $2,800 installed, depending on the width of the arch, the glass specification, and whether any framing repair is needed. Small half-round transoms at 24 inches or under usually land in the $650 to $950 range, while large curved statement windows at 72 inches or wider can exceed $2,100 before any structural work. Call (239) 453-7751 for a free on-site measurement and a firm number – we don’t quote arched windows by ballpark.
Do arched windows in Fort Myers need to be impact-rated?
Yes. Fort Myers falls within Florida’s High-Velocity Hurricane Zone, so any new or replacement window – including arched and curved units – must carry HVHZ product approval under the Florida Building Code. A decorative arch that isn’t impact-rated won’t pass a permit inspection and creates a serious vulnerability in a named storm. Both PGT and CGI manufacture custom curved units to HVHZ standards, and those are the products we install.
How long does it take to get a custom arched window installed?
From the day we confirm your order, custom curved and arched units typically take 10 to 21 business days to arrive. Installation itself usually takes half a day to a full day per unit, depending on size, floor level, and opening condition. We schedule your installation date as soon as the unit clears our pre-delivery inspection. If your opening needs framing repair, we coordinate that in the same visit to avoid a second mobilization.
Can you replace just the glass in an arched window, or does the whole unit need to come out?
It depends on the condition of the frame. If the frame is structurally sound and the profile still meets current product approval requirements, it’s sometimes possible to replace only the glass unit inside the existing frame – this is called a glass-only replacement or insert replacement. In practice, most arched units that need service in Fort Myers are old enough that the frame has also deteriorated, or the original unit doesn’t meet current HVHZ code, making a full unit replacement the right call. We’ll tell you honestly which option applies after looking at the opening – we’re not going to recommend a full replacement if a glass-only fix is the correct answer.
Ready to Replace or Install an Arched Window in Fort Myers?
Call (239) 453-7751 and a live person will answer – no voicemail, no call center, no next-day callback. We’ll set up a free on-site estimate, measure the arch, and give you a clear price before any work is scheduled. Ed Winslow has been doing this in Fort Myers since 2011, and his name goes on every job we take.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Fort Myers since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.